GPS Breakout-66 Ultimate channel w/10 Hz V.3 Adafruit

New! Version 3 comes with the latest module which has external antenna support and Pulse-Per-Second output

We carry a few different GPS modules here in the Adafruit shop, but none that satisfied our every desire - that's why we designed this little GPS breakout board. We believe this is the Ultimate GPS module, so we named it that.

It's got everything you want and more:

• 165 dBm sensitivity, 10 Hz updates, 66 channels


• 5V friendly design and only 20mA current draw


• Breadboard friendly + two mounting holes


• RTC battery-compatible


• Built-in datalogging


• PPS output on fix


• Internal patch antenna + u.FL connector for external active antenna


• Fix status LED


• https://learn.adafruit.com/adafruit-ultimate-gps

Info harga dan stok update klik : GPS Breakout-66 Ultimate channel w/10 Hz V.3 Adafruit

Koleksi lengkap kunjungi www.PusatKomponen.com

TV-B-Gone Kit - Universal v1.2 Adafruit

DESCRIPTION

When we were putting together the TV-B-Gone kit, we started imagining a dystopian future, filled with televisions, where this kit would be super useful and we'd be a hero for having one. And while maybe that's dramatic, the TV-B-Gone is perfect for playing pranks on your friends during the Super Bowl or getting some peace and quiet during dinner.

The TV-B-Gone is a kit that, when soldered together, allows you to turn off almost any television within 150 feet or more. It works on over 230 total power codes - 115 American/Asian and another 115 European codes. You can select which zone you want during kit assembly.

This is an unassembled kit which means that soldering is required - but its very easy and a great introduction to soldering in general. The kits powered by 2x AA batteries - that arent included - and the output comes from 2x narrow beam IR LEDs and 2x wide-beam IR LEDs.

And now for the brands!
Acer, Admiral, Aiko, Alleron, Anam National, AOC, Apex, Baur, Bell&Howell, Brillian, Bush, Candle, Citizen, Contec, Cony, Crown, Curtis Mathes, Daiwoo, Dimensia, Electrograph, Electrohome, Emerson, Fisher, Fujitsu, Funai, Gateway, GE, Goldstar, Grundig, Grunpy, Hisense, Hitachi, Infinity, JBL, JC Penney, JVC, LG, Logik, Loewe, LXI, Majestic, Magnavox, Marantz, Maxent, Memorex, Mitsubishi, MGA, Montgomery Ward, Motorola, MTC, NEC, Neckermann, NetTV, Nikko, NTC, Otto Versand, Palladium, Panasonic, Philco, Philips, Pioneer, Portland, Proscan, Proton, Pulsar, Pye, Quasar, Quelle, Radio Shack, Realistic, RCA, Samsung, Sampo, Sansui, Sanyo, Scott, Sears, SEI, Sharp, Signature, Simpson, Sinudyne, Sonolor, Sony, Soundesign, Sylviana, Tatung, Teknika, Thompson, Toshiba, Universum, Viewsonic, Wards, White Westinghouse, Zenith

https://learn.adafruit.com/tv-b-gone-kit

Info harga dan stok update klik : TV-B-Gone Kit - Universal v1.2 Adafruit

Koleksi lengkap kunjungi www.PusatKomponen.com

Amplifier Thermocouple MAX31855 breakout board v2.0 Adafruit

DESCRIPTION

Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The MAX31855K does everything for you, and can be easily interfaced with any microcontroller, even one without an analog input. This breakout board has the chip itself, a 3.3V regulator with 10uF bypass capacitors and level shifting circuitry, all assembled and tested. Comes with a 2 pin terminal block (for connecting to the thermocouple) and pin header (to plug into any breadboard or perfboard). Goes great with our 1m K-type thermocouple.

New! Now uses the MAX31855K instead of the MAX6675, so it can measure a wider temperature measurement range. Please note! the MAX31855 is not pin compatible or drop-in code compatible with the MAX6675. We do have an Arduino library for both chips but you'll need to adjust any existing MAX6675 designs for the new MAX31855. The MAX6675 has been discontinued by Maxim.

Version 2.0 now includes ferrite beads and filter capacitor onboard for better stability

Works with any K type thermocouple
Will not work with any other kind of thermocouple other than K type
-200C to +1350C output in 0.25 degree increments - note that K thermocouples have about 2C to 6C accuracy
Internal temperature reading
3.3 to 5v power supply and logic level compliant!
SPI data output requires any 3 digital I/O pins.

https://learn.adafruit.com/thermocouple/

Info harga dan stok update klik : Amplifier Thermocouple MAX31855 breakout board v2.0 Adafruit

Koleksi lengkap kunjungi www.PusatKomponen.com

Konektor Battery T Plug High Current

Specification

• Suitable for high current power connectors.


• ROHS compliant, plug a large current for a battery, the maximum current through 100A.


• Male plug gold plated, silver plated female plug.


• Gold-plated T plug contact resistance is smaller, more reliable connection.


• Excellent conduction performance, small internal resistance to avoid crashes and instant power shortage plug loose crashes.

Info harga dan stok update klik : Konektor Battery T Plug High Current

Koleksi lengkap kunjungi www.PusatKomponen.com

Solenoid Valve Kuningan 1 1/4 Inchi 12VDC Normaly Closed

Specification

• Sealing material: NBR nitrile rubber (temperature 80 degrees)


• Fluid: water, gas, oil


• Forms of control: normally closed (power on, power off closed)


• Normally closed: power open, remained closed when not energized


• Installation: body above indicates the direction of flow, which in turn means would not be used, the water will be back saliva can also cause can not be used. You will then need to install backflow valve.


• Please DC12V and DC24V power supply with current 2A above, to start the normal operation of the valve!


• Body material :( body coil entire copper + zinc alloy)

Parameter

• Power : 14W


• Fluida : Air, udara, minyak


• Voltase : 220V AC


• Tekanan : 0-1Mpa


• Suhu Fluida : -5-80 Derajat C

Info harga dan stok update klik : Solenoid Valve Kuningan 1 1/4 Inchi 12VDC Normaly Closed

Koleksi lengkap kunjungi www.PusatKomponen.com

Silinder Pneumatik AirTAC MA16x50

AirTAC Cylinder MA16x50 Pneumatic Equipment

Info harga dan stok update klik : Silinder Pneumatik AirTAC MA16x50

Koleksi lengkap kunjungi www.PusatKomponen.com

Silinder Pneumatik AirTAC MA20x200

AirTAC Cylinder MA20x200 Pneumatic Equipment

Info harga dan stok update klik : Silinder Pneumatik AirTAC MA20x200

Koleksi lengkap kunjungi www.PusatKomponen.com

Silinder Pneumatik AirTAC MA20x50

AirTAC Cylinder MA20x50 Pneumatic Equipment

Info harga dan stok update klik : Silinder Pneumatik AirTAC MA20x50

Koleksi lengkap kunjungi www.PusatKomponen.com

Orange Pi One Quad Core Cortex-A7 MiniPC + Case

TERMASUK CASE TRANSPARAN SESUAI FOTO

Hardware specification

• CPU : H3 Quad-core Cortex-A7 H.265/HEVC 4K


• GPU : Mali400MP2 GPU @600MHz


• Supports OpenGL ES 2.0


• Memory (SDRAM) : 512MB DDR3 (shared with GPU)


• Onboard Storage : TF card (Max. 64GB) / MMC card slot


• Onboard Network : 10/100M Ethernet RJ45


• Video Input ;
  A CSI input connector Camera : Supports 8-bit YUV422 CMOS sensor interface
  Supports CCIR656 protocol for NTSC and PAL
  Supports SM pixel camera sensor
  Supports video capture solution up to 1080p@30fps


• Video Outputs ;
  Supports HDMI output with HDCP
  Supports HDMI CEC
  Supports HDMI 30 function
  Supports simultaneous output of HDMI


• Power Source : DC input can supply power, but USB OTG input dont supply power


• USB 2.0 Ports : Only One USB 2.0 HOST, one USB 2.0 OTG


• Buttons : Power Button(SW4)


• Low-level peripherals : 40 Pins Header,compatible with Raspberry Pi B+


• LED : Power led & Status led


• Key : POWER


• Supported OS : Android Ubuntu, Debian, Rasberry Pi Image


• Interface definition ;
  Product size : 69 mm 48mm
  Weight : 36g

Info harga dan stok update klik : Orange Pi One Quad Core Cortex-A7 MiniPC + Case

Koleksi lengkap kunjungi www.PusatKomponen.com

Sensor Magnetic Digital DFRobot

INTRODUCTION
what's the best way to detect the magnet? Use anther magnet. But it's not sensitive enough. You have to feel it by youself.Right.This magnetic sensor knows whether there is a magnetic object nearby or not. And it correctly tells you through ditigal output

FEATURES
- Wide voltage range from 3.3V to 5V
- Standard assembling structure (Times-of-5mm Center distance between two 3mm mounting holes)
- Easily recognitive interfaces of sensors ("A" for analog and "D" for digital)
- Icons to simplely illustrate sensor function
- High quality connector
- Immersion gold surface

SPECIFICATION
- Supply Voltage: 3.3V to 5V
- Indicator LED on board
- Interface: Digital
- Size:22x30mm (0.9x1.2in)

DOCUMENTS
dfrobot.com/wiki/index.php/Digital_magnetic_sensor_SKU:_DFR0033

Info harga dan stok update klik : Sensor Magnetic Digital DFRobot

Koleksi lengkap kunjungi www.PusatKomponen.com

Battery LiPo Tiger 1100mAh 3S 25C

Specification

• Kapasitas : 1100mah


• Tegangan Constant Tiap Cell : 3.7 Volt


• Tegangan Maksimal Tiap Cell : 4.2 Volt


• Tegangan Constant Total : 11.1 Volt


• Tegangan Maksimal Total : 12.6 Volt


• Dimensi : 62*32*25 mm


• Berat : 84 Gram


• C Point Discharge : 25C


• C Point Charge : 2C


• Konektor : XT60

Info harga dan stok update klik : Battery LiPo Tiger 1100mAh 3S 25C

Koleksi lengkap kunjungi www.PusatKomponen.com

Mengenal Bagian-bagian Tampilan Aplikasi Arduino IDE

Mengenal Bagian-bagian Aplikasi Arduino IDE

Untuk memprogram board Arduino, kita butuh aplikasi IDE (Integrated Development Environment) bawaan dari Arduino. Aplikasi tersebut bisa di download di official website https://www.arduino.cc/. Dan untuk mendapatkan komponen Arduino (Board, Shield, Modul Belajar) dengan harga murah bisa di cek di Pusat Komponen Arduino

Aplikasi ini berguna untuk membuat, membuka, dan mengedit source code Arduino (Sketches, para programmer menyebut source code arduino dengan istilah "sketches").

Selanjutnya, jika kita menyebut source code yang ditulis untuk Arduino, kita sebut "sketch" juga ya :). Sketch merupakan source code yang berisi logika dan algoritma yang akan diupload ke dalam IC mikrokontroller (Arduino).



Interface Arduino IDE tampak  seperti  gambar diatas Dari  kiri  ke kanan dan atas ke bawah,

Bagian-bagian IDE Arduino

• Verify pada versi sebelumnya dikenal dengan istilah Compile. Sebelum aplikasi diupload ke board Arduino, biasakan untuk memverifikasi terlebih dahulu sketch yang dibuat. Jika ada kesalahan pada sketch, nanti akan muncul error. Proses Verify / Compile mengubah sketch ke binary code untuk diupload ke mikrokontroller.


• Upload tombol ini berfungsi untuk mengupload sketch ke board Arduino. Walaupun kita tidak mengklik tombol verify, maka sketch akan di-compile, kemudian langsung diupload ke board. Berbeda dengan tombol verify yang hanya berfungsi untuk memverifikasi source code saja.


• New Sketch Membuka window dan membuat sketch baru


• Open Sketch Membuka sketch yang sudah pernah dibuat. Sketch yang dibuat dengan IDE Arduino akan disimpan dengan ekstensi file .ino


• Save  Sketch menyimpan sketch, tapi tidak disertai dengan mengkompile.


• Serial  Monitor Membuka interface untuk  komunikasi  serial, nanti akan kita diskusikan lebih lanjut pada bagian selanjutnya


• Keterangan Aplikasi pesan-pesan yang dilakukan aplikasi akan muncul di sini, misal "Compiling" dan "Done Uploading"ketika kita mengcompile dan mengupload sketch ke board Arduino


• Konsol Pesan-pesan yang dikerjakan aplikasi dan pesan-pesan tentang sketch akan muncul pada bagian ini. Misal, ketika aplikasi mengcompile atau ketika ada kesalahan pada sketch yang  kita  buat,  maka  informasi error dan baris akan diinformasikan di bagian ini.


• Baris  Sketch bagian  ini  akan  menunjukkan  posisi baris kursor yang sedang aktif pada sketch.


• Informasi  Port Bagian ini menginformasikan port yang dipakai oleh board Arduino.

Demikian penjelasan dari Tampilan/Interface IDE Arduino. Semoga Bermanfaat.

Info harga dan stok update klik : Mengenal Bagian-bagian Tampilan Aplikasi Arduino IDE

Koleksi lengkap kunjungi www.PusatKomponen.com