Modul Relay 2 Channel

Deskripsi

Terdapat 2 channel relay pada modul ini, dengan tegangan 3.3V/5V DC untuk melakukan kontrol terhadap relay. Sangat baik untuk melakukan switch pada perangkat AC maupun DC yang membutuhkan arus dan tegangan yang besar.

Relay yang digunakan ialah SPDT atau single pole double throw dengan arus dan tegangan maksimal 10A/250V AC. Ground pada koil relay terpisah dengan ground pada sinyal input. Namun keduanya dapat disatukan dengan memberikan jumper pada header.

http://www.instructables.com/id/Controlling-AC-light-using-Arduino-with-relay-modu/?ALLSTEPS

Info harga dan stok update klik : Modul Relay 2 Channel

Koleksi lengkap kunjungi www.PusatKomponen.com

LCD TFT Nextion HMI 7" Intelligent Display Module -Itead

Overview

7" Nextion NX8048T070 HMI TFT Intelligent Display Module
Package include: a Nextion 7'' display, a wire, a power supply test board

Nextion is a Seamless Human Machine Interface (HMI) solution that provides a control and visualisation interface between a human and a process, machine, application or appliance. It is the best solution to replace the traditional LCD and LED Nixie tube.

NX8048T070 is a powerful 7'' HMI, which is member of Nextion family. Features include: a 7" TFT 800*480 resistive touch screen display, 4M Flash, 3584 Byte RAM, 65k colors.

Features

• 800*480 Resolution


• RGB 65K true to life colours


• TFT Screen with integrated 4-wire Resistive Touch Panel


• Easy 4 pin interface to any TTL Serial Host


• On board micro-SD card for firmware upgrade

Documents
Please visit our wiki page for more info about this product. (wiki.iteadstudio.com/Nextion_HMI_Solution)

Info harga dan stok update klik : LCD TFT Nextion HMI 7" Intelligent Display Module -Itead

Koleksi lengkap kunjungi www.PusatKomponen.com

SparkFun OpenLog Data Logger

Description

The SparkFun OpenLog is an open source data logger that works over a simple serial connection and supports microSD cards up to 64GB. The OpenLog can store or log huge amounts of serial data and act as a black box of sorts to store all the serial data that your project generates, for scientific or debugging purposes.

The SparkFun OpenLog runs off of an onboard ATmega328, running at 16MHz thanks to the onboard crystal.The OpenLog draws 6mA when recording a 512 byte buffer, but as that process takes a fraction of a second, the average current draw is closer to 5mA. Keep in mind though that if you are recording a constant data stream at 115200bps, you will approach that 6mA limit. All data logged by the OpenLog is stored on the microSD card that involve the features of 64MB to 64GB capacity and FAT16 or FAT32 file type.

Note: The latest version of the firmware (included with this board) does not compile in Arduino 1.6.7. You will need to compile in 1.6.5.

Features:

• VCC Input: 3.3V-12V (Recommended 3.3V-5V)


• Log to low-cost microSD FAT16/32 cards up to 64GB


• Simple command interface


• Configurable baud rates (up to 115200bps)


• Preprogrammed ATmega328 and bootloader


• Four SPI pogo pins


• Two LEDs indicate writing status


• 2mA idle, 6mA at maximum recording rate

Documents:

• Schematic cdn.sparkfun.com/datasheets/Dev/Arduino/Boards/OpenLog_v15.pdf


• Hookup Guide learn.sparkfun.com/tutorials/openlog-hookup-guide?_ga=1.233035033.603563927.1464397800


• Github github.com/sparkfun/OpenLog

Info harga dan stok update klik : SparkFun OpenLog Data Logger

Koleksi lengkap kunjungi www.PusatKomponen.com

Autopilot Pixhawk Advanced 3DR PX4

Description

Advanced autopilot system with 32 bit ARM cortex M4 processor
NuttX real-time operating system for incredible performance
14 PWM/servo outputs
Integrated backup system for in-flight recovery and manual override

The 3DR PX4 Pixhawk Advanced Autopilot is an advanced autopilot system designed by the PX4 open-hardware project and manufactured by 3D Robotics. It features advanced processor and sensor technology from ST Microelectronics and a NuttX real-time operating system, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.

The benefits of the Pixhawk system include integrated multithreading, a Unix/Linux-like programming environment, completely new autopilot functions such as Lua scripting of missions and flight behavior, and a custom PX4 driver layer ensuring tight timing across all processes. These advanced capabilities ensure that there are no limitations to your autonomous vehicle. Pixhawk allows existing APM and PX4 operators to seamlessly transition to this system and lowers the barriers to entry for new users to participate in the exciting world of autonomous vehicles.

Features

• Advanced 32 bit ARM Cortex M4 Processor running NuttX RTOS


• 14 PWM/servo outputs


• Abundant connectivity options for additional peripherals (UART, I2C, CAN)


• Integrated backup system for in-flight recovery and manual override


• Backup system integrates mixing, providing consistent autopilot and manual override mixing modes


• Redundant power supply inputs and automatic failover


• External safety button for easy motor activation


• Multicolor LED indicator


• High-power, multi-tone piezo audio indicator

PDF File
Datasheet robotshop.com/media/files/pdf/datasheet-pixhawk.pdf

Info harga dan stok update klik : Autopilot Pixhawk Advanced 3DR PX4

Koleksi lengkap kunjungi www.PusatKomponen.com

Motor Servo Hitec Standard HS-311

Description

• Speed (sec/60o): 0.19


• Torque (Kg-cm/Oz-in): 3.7/49


• Size (mm): 40 x 20 x 37


• Weight (g/oz): 43/1.51


• The Hitec HS-311 Servo Motor provides all the performance and reliability you would expect to find in a more expensive servo. Combined with precise resin gears and SMT circuitry, the HS-311 represents a remarkable value in today's robotics market.


• Useful Links
  Hitec HS-311 Servo Motor Datasheet robotshop.com/media/files/pdf/hs311.pdf
  Hitec Servo Manual robotshop.com/media/files/pdf/servomanual.pdf

Info harga dan stok update klik : Motor Servo Hitec Standard HS-311

Koleksi lengkap kunjungi www.PusatKomponen.com

Feather M0 Bluefruit LE Adafruit

DESCRIPTION

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores.

This is the Adafruit Feather M0 Bluefruit LE - our take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB and battery charging. Its an Adafruit Feather M0 with a BTLE module, ready to rock!

Here's some handy specs! Like all Feather M0's you get:

• Measures 2.0" x 0.9" x 0.28" (51mm x 23mm x 8mm) without headers soldered in


• Light as a (large?) feather - 5.7 grams


• ATSAMD21G18 @ 48MHz with 3.3V logic/power


• No EEPROM


• 3.3V regulator with 500mA peak current output


• USB native support, comes with USB bootloader and serial port debugging


• You also get tons of pins - 20 GPIO pins


• Hardware Serial, hardware I2C, hardware SPI support


• 8 x PWM pins


• 10 x analog inputs


• 1 x analog output


• Built in 100mA lipoly charger with charging status indicator LED


• Pin #13 red LED for general purpose blinking


• Power/enable pin


• 4 mounting holes


• Reset button


• The Feather M0 Bluefruit LE uses the extra space left over to add our excellent Bluefruit BTLE module + two status indicator LEDs.


• The Power of Bluefruit LE , The Bluefruit LE module is an nRF51822 chipset from Nordic, programmed with multi-function code that can do quite a lot! For most people, they'll be very happy to use the standard Nordic UART RX/TX connection profile. In this profile, the Bluefruit acts as a data pipe, that can 'transparently' transmit back and forth from your iOS or Android device. You can use our iOS App or Android App, or write your own to communicate with the UART service.


• learn.adafruit.com/adafruit-feather-m0-bluefruit-le/overview

Info harga dan stok update klik : Feather M0 Bluefruit LE Adafruit

Koleksi lengkap kunjungi www.PusatKomponen.com

Feather M0 Bluefruit LE Adafruit

DESCRIPTION

Feather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores.

This is the Adafruit Feather M0 Bluefruit LE - our take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB and battery charging. Its an Adafruit Feather M0 with a BTLE module, ready to rock!

Here's some handy specs! Like all Feather M0's you get:

• Measures 2.0" x 0.9" x 0.28" (51mm x 23mm x 8mm) without headers soldered in


• Light as a (large?) feather - 5.7 grams


• ATSAMD21G18 @ 48MHz with 3.3V logic/power


• No EEPROM


• 3.3V regulator with 500mA peak current output


• USB native support, comes with USB bootloader and serial port debugging


• You also get tons of pins - 20 GPIO pins


• Hardware Serial, hardware I2C, hardware SPI support


• 8 x PWM pins


• 10 x analog inputs


• 1 x analog output


• Built in 100mA lipoly charger with charging status indicator LED


• Pin #13 red LED for general purpose blinking


• Power/enable pin


• 4 mounting holes


• Reset button


• The Feather M0 Bluefruit LE uses the extra space left over to add our excellent Bluefruit BTLE module + two status indicator LEDs.


• The Power of Bluefruit LE


• The Bluefruit LE module is an nRF51822 chipset from Nordic, programmed with multi-function code that can do quite a lot! For most people, they'll be very happy to use the standard Nordic UART RX/TX connection profile. In this profile, the Bluefruit acts as a data pipe, that can 'transparently' transmit back and forth from your iOS or Android device. You can use our iOS App or Android App, or write your own to communicate with the UART service.


• https://learn.adafruit.com/adafruit-feather-m0-bluefruit-le/overview

Info harga dan stok update klik : Feather M0 Bluefruit LE Adafruit

Koleksi lengkap kunjungi www.PusatKomponen.com