Sensor Liquid Flow 1/2 Inchi Kuningan

Features:
1, the product appearance of lightweight flexible, small size, easy to install.
2, stainless steel beads inlaid internal impeller, wear forever.
3, seal with the structure under the force never leaks.
4, the Hall element imported from Germany, and with potting package, to prevent water, never aging.
5, all raw materials are in line with ROHS testing standards

Caution:
1. Non-violent shocks and chemical erosion.
2. Prohibited throw or collision.
3. Vertical mounting inclination of not more than 5 degrees.
4. Medium temperature should not exceed 120 Derajat C

Wiring:
1 red IN positive line
2 yellow OUT signal output line
3 black GND to negative

Frequency:
- F = 8.1 * Q (L / Min) -3 error: +- 2% voltage: 3.5-24VDC, current can not exceed 10mA, after a liter of water stream output 450 pulses
- That constant frequency calculation = 8.1 * Unit Flow (L / min) * Time (seconds) -3
- Flow range: 1-30L / min

Technical parameters
Scope: Apply to food, credit card machines, water vending machines, and other flow measurement devices!
1, the lowest rated working voltage : DC4.5 5V-24V
2, the maximum operating current : 15 mA (DC 5V)
3, the working voltage range : DC 5 ~ 18 V
4, load capacity : <=10 mA (DC 5V)
5, temperature range : <= 80 Derajat C
6, Operating humidity : 35% ~ 90% RH (no condensation state)
7, allowing pressure : The following pressure 1.75Mpa
8, the storage temperature : -25 ~ + 80 Derajat C
9, storage humidity : 25% ~ 95% RH

Info harga dan stok update klik : Sensor Liquid Flow 1/2 Inchi Kuningan

Koleksi lengkap kunjungi www.PusatKomponen.com